Publications

Showing results for "youssef" 1-25 of 29 Next

The publications on this page are generated nightly from the NCSU Library's Scholarly Publications Repository. This repository is by no means a fully comprehensive listing of publications. Publications can be added to the repository manually by visiting the Publications Repository Submission Form.

Title Journal Year
A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures Materials Research Letters, 3(2), 95-99. Youssef, K. M., Zaddach, A. J., Niu, C. N., Irving, D. L., & Koch, C. C. 2015
Structural evolution of Cu(1-X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties Journal of Alloys and Compounds, 627, 108-116. Mula, S., Setman, D., Youssef, K., Scattergood, R. O., Koch, C. C. 2015
Thermal conductivity of exfoliated p-type bismuth antimony telluride Journal of Electronic Materials, 43(2), 320-328. Zheng, H., Jagannadham, K., & Youssef, K. 2014
Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy Journal of Alloys and Compounds, 558, 44-49. Roy, D., Atwater, M. A., Youssef, K., Ledford, J. C., Scattergood, R. O., & Koch, C. C. 2013
Effect of oxygen and associated residual stresses on the mechanical properties of high growth rate Czochralski silicon Journal of Applied Physics, 113(13). Youssef, K., Shi, M., Radue, C., Good, E., & Rozgonyi, G. 2013
Fracture strength of photovoltaic silicon wafers evaluated using a controlled flaw method Advanced Engineering Materials, 15(8), 756-760. Shi, M. R., Youssef, K., & Rozgonyi, G. A. 2013
Nanostructure fabrication on germanium and silicon by nanocoining imprint technique Precision Engineering, 37(4), 871-879. Zdanowicz, E., Dow, T. A., Scattergood, R. O., & Youssef, K. 2013
Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy Acta Materialia, 60(8), 3340-3349. Bahmanpour, H., Youssef, K. M., Horky, J., Setman, D., Atwater, M. A., Zehetbauer, M. J., Scattergood, R. O., & Koch, C. C. 2012
Nano-indentation: A tool to investigate crack propagation related phase transitions in PV silicon Solar Energy Materials and Solar Cells, 96(1), 166-172. Kulshreshtha, P. K., Youssef, K. M., & Rozgonyi, G. 2012
Understanding the effect of impurities and grain boundaries on mechanical behavior of Si via nanoindentation of (110)/(100) direct Si bonded wafers Journal of Materials Research, 27(1), 349-355. Youssef, K., Yu, X. G., Seacrist, M., & Rozgonyi, G. 2012
Oxygen precipitation related stress-modified crack propagation in high growth rate Czochralski silicon wafers Journal of the Electrochemical Society, 159(2), H125-H129. Kulshreshtha, P. K., Yoon, Y., Youssef, K. M., Good, E. A., & Rozgonyi, G. 2012
Deformation twinning in a nanocrystalline hcp Mg alloy Scripta Materialia, 64(3), 213-216. Wu, X. L., Youssef, K. M., Koch, C. C., Mathaudhu, S. N., Kecskes, L. J., & Zhu, Y. T. 2011
Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling Journal of Materials Science, 46(19), 6316-6322. Bahmanpour, H., Youssef, K. M., Scattergood, R. O., & Koch, C. C. 2011
Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys Acta Materialia, 59(14), 5758-5764. Youssef, K., Sakaliyska, M., Bahmanpour, H., Scattergood, R., & Koch, C. 2011
High hardness in a nanocrystalline Mg(97)Y(2)Zn(1) alloy Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 528(25-26), 7494-7499. Youssef, K. M., Wang, Y. B., Liao, X. Z., Mathaudhu, S. N., Kecskes, L. J., Zhu, Y. T., & Koch, C. C. 2011
Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 529, 230-236. Bahmanpour, H., Kauffmann, A., Khoshkhoo, M. S., Youssef, K. M., Mula, S., Freudenberger, J., Eckert, J., Scattergood, R. O., & Koch, C. C. 2011
Understanding creep in nanocrystalline materials Transactions of the Indian Institute of Metals, 63(2-3), 373-378. Gollapudi, S., Rajulapati, K. V., Charit, I., Youssef, K. M., Koch, C. C., Scattergood, R. O., & Murty, K. L. 2010
Nanostructured materials by mechanical alloying: New results on property enhancement Journal of Materials Science, 45(17), 4725-4732. Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E. H., & Zhu, Y. T. T. 2010
Impacts of fertilization on water quality of a drained pine plantation: A worst case scenario Journal of Environmental Quality, 39(1), 293-303. Beltran, B. J., Amatya, D. M., Youssef, M., Jones, M., Callahan, T. J., Skaggs, R. W., & Nettles, J. E. 2010
Proximity gettering of Cu at a (110)/(001) grain boundary interface formed by direct silicon bonding Applied Physics Letters, 94(22). Yu, X., Lu, J., Youssef, K., & Rozgonyi, G. 2009
Influence of pulse plating parameters on the synthesis and preferred orientation of nanocrystalline zinc from zinc sulfate electrolytes Electrochimica Acta, 54(2), 677-683. Youssef, K. M., Koch, C. C., & Fedkiw, P. S. 2008
Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility Scripta Materialia, 54(2), 251-256. Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. 2006
Ultrahigh strength and high ductility of bulk nanocrystalline copper Applied Physics Letters, 87(9). Youssef, K. M., Scattergood, R. O., Murty, K. L., Horton, J. A., & Koch, C. C. 2005
Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys Advanced Engineering Materials, 7(9), 787-794. Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. 2005
Tensile properties of in situ consolidated nanocrystalline Cu Acta Materialia, 53(5), 1521-1533. Cheng, S., Ma, E., Wang, Y. M., Kecskes, L. J., Youssef, K. M., Koch, C. C., Trociewitz, U. P., & Han, K. 2005

North Carolina State University