Publications

Showing results for "Metals" 1-25 of 77 Next

The publications on this page are generated nightly from the NCSU Library's Scholarly Publications Repository. This repository is by no means a fully comprehensive listing of publications. Publications can be added to the repository manually by visiting the Publications Repository Submission Form.

Title Journal Year
Performance of bond coats modified by platinum group metals for applications in thermal barrier coatings Journal of Materials Engineering and Performance, 26(7), 3191-3203. Tawancy, H. M., Alhems, L. M., & Aboelfotoh, M. O. 2017
Dislocation cross-slip controlled creep at high stresses and transitional creep mechanisms in zircaloy-4 Minerals Metals & Materials Series, ) (pp. 65-77). Kombaiah, B., & Murty, K. L. 2017
Effect of Mo and Bi additions on the microstructure of Zr-Cr-Fe alloy after beta-quenching Minerals Metals & Materials Series, ) (pp. 183-192). Wang, J. M., Luan, B. F., Murty, K. L., & Liu, Q. 2017
Fracture behavior and grain boundary sliding during high-temperature low-stress deformation of AZ31 magnesium alloy Minerals Metals & Materials Series, ) (pp. 279-287). Roodposhti, P. S., & Murty, K. L. 2017
Fundamental discovery of Q-phases and direct conversion of carbon into diamond and h-BN into c-BN Minerals Metals & Materials Series, ) (pp. 219-228). Narayan, J., & Bhaumik, A. 2017
Understanding the atomic-level chemistry and structure of oxide deposits on fuel rods in light water nuclear reactors using first principles methods JOM: the Journal of the Minerals, Metals & Materials Society, 68(11), 2912-2921. Rak, Z., O'Brien, C. J., Brenner, D. W., Andersson, D. A., & Stanek, C. R. 2016
Biological response of human bone marrow-derived mesenchymal stem cells to commercial tantalum coatings with microscale and nanoscale surface topographies JOM: the Journal of the Minerals, Metals & Materials Society, 68(6), 1672-1678. Skoog, S. A., Kumar, G., Goering, P. L., Williams, B., Stiglich, J., & Narayan, R. J. 2016
Effect of synthesizing temperature on microstructure and electrochemical property of the hydrothermal conversion coating on Mg-2Zn-0.5Mn-Ca-Ce alloy Metals, 6(3). Guo, G. H., Song, D., Jiang, J. H., Ma, A. B., Zhang, L. W., & Li, C. 2016
Microstructural approach to equal channel angular processing of commercially pure titanium-A review Transactions of Nonferrous Metals Society of China, 25(5), 1353-1366. Roodposhti, P. S., Sarkar, N. F. A., & Murty, K. L. 2015
Influence of pouring temperature on solidification behavior, microstructure and mechanical properties of sand-cast Mg-10Gd-3Y-0.4Zr alloy Transactions of Nonferrous Metals Society of China, 25(2), 363-374. Pang, S., Wu, G. H., Liu, W. C., Zhang, L., Zhang, Y., Conrad, H., & Ding, W. J. 2015
Effect of equal-channel angular pressing and aging on corrosion behavior of ZK60 Mg alloy Transactions of Nonferrous Metals Society of China, 25(12), 3909-3920. Li, X., Jiang, J. H., Zhao, Y. H., Ma, A. B., Wen, D. J., & Zhu, Y. T. 2015
Influence of cooling rate on solidification behavior of sand-cast Mg-10Gd-3Y-0.4Zr alloy Transactions of Nonferrous Metals Society of China, 24(11), 3413-3420. Pang, S., Wu, G. H., Liu, W. C., Zhang, L., Zhang, Y., Conrad, H., & Ding, W. J. 2014
Growth of zircone on nanoporous alumina using molecular layer deposition JOM: the Journal of the Minerals, Metals & Materials Society, 66(4), 649-653. Hall, R. A., George, S. M., Kim, Y., Hwang, W., Samberg, M. E., Monteiro-Riviere, N. A., & Narayan, R. J. 2014
Biological, electronic, and functional thin films JOM: the Journal of the Minerals, Metals & Materials Society, 66(4), 588-589. Narayan, R. 2014
Effect of severe plastic deformation on the structure and mechanical properties of bulk nanocrystalline metals Acta Metallurgica Sinica, 50(2), 156-168. Ni, S., Liao, X. Z., & Zhu, Y. T. 2014
Strengthening at nanoscaled coherent twin boundary in f.c.c. metals Philosophical Magazine, 94(11), 1249-1262. Gu, P., Dao, M., & Zhu, Y. T. 2014
Burst and biaxial creep of thin-walled tubing of low c/a-Ratio HCP Metals Procedia Engineering, 55) (pp. 443-450). Murty, K. L., Seok, C. S., & Kombaiah, B. 2013
Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy JOM: the Journal of the Minerals, Metals & Materials Society, 65(12), 1780-1789. Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. 2013
Twin intersection mechanisms in nanocrystalline fcc metals Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 585, 292-296. Wu, F., Wen, H. M., Lavernia, E. J., Narayan, J., & Zhu, Y. T. 2013
Prevention of ultraviolet (UV)-induced surface damage and cytotoxicity of polyethersulfone using atomic layer deposition (ALD) titanium dioxide JOM: the Journal of the Minerals, Metals & Materials Society, 65(4), 550-556. Petrochenko, P. E., Scarel, G., Hyde, G. K., Parsons, G. N., Skoog, S. A., Zhang, Q., Goering, P. L., & Narayan, R. J. 2013
Inkjet printing of Amphotericin B onto biodegradable microneedles using piezoelectric inkjet printing JOM: the Journal of the Minerals, Metals & Materials Society, 65(4), 525-533. Boehm, R. D., Miller, P. R., Schell, W. A., Perfect, J. R., & Narayan, R. J. 2013
Recent developments in functional thin films JOM: the Journal of the Minerals, Metals & Materials Society, 65(4), 517-518. Narayan, R. J. 2013
Thermodynamic stabilization of grain size in nanocrystalline metals Materials Science Forum, 715-716) (pp. 323-328). Koch, C. C., Scattergood, R. O., VanLeeuwen, B. K., & Darling, K. A. 2012
Magnesium technology 2012: proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2012 Annual Meeting & Exhibition, Orlando Florida, USA, March11-15 (2012). Magnesium technology 2012: proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2012 Annual Meeting & Exhibition, Orlando Florida, USA, March11-15. Warrendale, Pennsylvania: The Minerals, Metals and Materials Society. 2012
Dislocation-twin interactions in nanocrystalline fcc metals Acta Materialia, 59(2), 812-821. Zhu, Y. T., Wu, X. L., Liao, X. Z., Narayan, J., Kecskes, L. J., & Mathaudhu, S. N. 2011

North Carolina State University